FREUD ROUTER BIT GUIDE–Grooving Bits
.GROOVING BIT
Decorative Groove
USES: Uses: Cuts dadoes and grooves with profiled edges in panels to create decorative accents.
SIZES: Cutting diameter: 1/2–2”
VARIATIONS: Available in several profiles, and with a top-mounted bearing for template mounting.
.GROOVING BIT
Mortising
USES: Forms mortises dadoes, and rabbits when used with an
edge guide.
SIZES: Cutting diameter: 11/32–1 1/4”
VARIATIONS: Flush trims when used with a guide bushing.
.GROOVING BIT
Round-Nose
USES: Form flutes and veins, makes signs, and cuts coves when used with an edge guide.
SIZES: Cutting diameter: 1/8–2”
VARIATIONS: Available with top-mounted bearing for template mounting.
.GROOVING BIT
Spiral
USES: Cut dadoes,
grooves, mortises, and rabbets when used with an edge guide.
SIZES: Cutting diameter: 1/8–1/2”
VARIATIONS: Up spiral clears chips efficiently for fast cutting. Down spiral leaves a top edge free from tear-out.
.GROOVING BIT
Straight
USES: Cuts dadoes, grooves rabbets, box joints, inlays, mortises, and flush-trims when used with a guide bushing.
SIZES: Cutting diameter: 1/16–2”
VARIATIONS: Available in many lengths and diamters, including
plywood-specific.
 
.GROOVING BIT
V-Groove
USES: Creates decorative accents, makes signs and letters, and produces veining and chamfers.
SIZES: Cutting diameter: 1/4–2”
VARIATIONS: Available with top-mounted bearing for template mounting.
       
©2008 Industrial Plywood, Inc.