Router Specialty Bit Guide Freud Tools

*PLUNGE ROUTER RECOMMENDED.

Go Back to All Freud Tools Products

Crown Molding
SPECIALTY BIT


Crown Molding SPECIALTY BIT

USES: Creates decorative crown molding. Changing bit height alters profile.

SIZES: Cutting height: 1 1/4”

VARIATIONS: Available in many profiles to produce moldings in a variety of shapes.

Dish Carving
SPECIALTY BIT


Dish Carving SPECIALTY BIT

USES: Forms trays and shallow bowls, makes signs, creates decorative edges when used with an edge guide.

SIZES: Cutting diameter: 7/16–1 1/8”

VARIATIONS: Available with top-mounted bearing for template routing.

Face Molding
SPECIALTY BIT


Face Molding SPECIALTY BIT

USES: Creates decorative molding for furniture and cabinet trim.

SIZES: Cutting height: 7/8–1 5/8”

VARIATIONS: Several profiles available to produce trim in a variety of shapes.

Keyhole*
SPECIALTY BIT


Keyhole* SPECIALTY BIT

USES: Bores a large-diameter hole for screw or nail head, and then cuts sideways to produce a T-shaped slot. Used for hanging plaques/frames.

SIZES: Cutting diameter: 25/64”

VARIATIONS: Also useful for creating hold-down slots in jigs and shop fixtures.

Multi-Profile
SPECIALTY BIT


Multi-Profile SPECIALTY BIT

USES: Cuts many profiles by using only a portion of the bit or by making multiple passes.

SIZES: Cutting height: 51/64–1 59/64”

VARIATIONS: Available in several styles that allow production of many different profiles.

Panel Pilot*
SPECIALTY BIT


Panel Pilot* SPECIALTY BIT

USES: Cuts openings in panels using a drill-through point that eliminates the need for a starter hole.

SIZES: Cutting height: 1/8–1 3/4”

VARIATIONS: Pilots at tip and shank allow use for template routing.

Pattern
SPECIALTY BIT


Pattern SPECIALTY BIT

USES: Recreates template shapes using a top-mounted bearing. Also works as a straight bit and flush-trimming bit.

SIZES: Cutting diameter: 5/16–2”

VARIATIONS: Also can use in table-mounted router with pattern below workpiece.

Raised Panel*
SPECIALTY BIT


Raised Panel* SPECIALTY BIT

USES: Creates an interlocking joint with a large glue surface area for strong edge-to-edge or end-to-end joints.

SIZES: Cutting height: 3/8–1 1/2”

VARIATIONS: Variable-height style available.

Raise Panel with Backcutter*
SPECIALTY BIT


Raise Panel with Backcutter* SPECIALTY BIT

USES: Forms a raised panel and relieves back face to form a tongue on 3/4” stock.

SIZES: Cutting diameter: 3 1/2”

VARIATIONS: Several styles available; backcutters are replaceable.

Recoverable-Bead Glass Door*
SPECIALTY BIT


Recoverable-Bead Glass Door*SPECIALTY BIT

USES: Cuts the cope and stick joints in door frames, and simultaneously forms a removable glass-retaining bead.

SIZES: Major radius: 7/32–15/64”

VARIATIONS: Several profiles available.

T-Slot
SPECIALTY BIT


T-Slot SPECIALTY BIT

USES: Cuts a wide T-shaped channel to receive hanging hooks or backing plates for display/storage walls.

SIZES: Cutting diameter: 1 1/8–1 3/8”

VARIATIONS: Also useful for creating hold-down slots in jigs and shop fixtures.

Vertical Raised Panel*
SPECIALTY BIT


Vertical Raised Panel* SPECIALTY BIT

USES: Forms raised-panel profiles on cabinet and passage doors. Panel stands vertically while cutting.

SIZES: Cutting diameter: 1 1/2”

VARIATIONS: Many styles available to produce panels with varying profiles.

Ready to Order? Need it Delivered?

We deliver! For more information please contact us!

Our Locations

READING DIVISION

550 South Fifth Street | Reading, PA 19602
(610) 376-3343
FAX (610) 376-2256

LEWISTOWN DIVISION

85 West Charles Street | Lewistown, PA 17044
(717) 242-9663
FAX (717) 242-2299